Google has turned to India’s Supreme Court as a “last hope” to block an order that has the potential to reshape the Android ecosystem. Last October, the Competition Commission of India (CCI) fined Google $161.9 million and barred the search giant from …
A dead NASA satellite is returning to Earth after 38 years in space
After nearly four decades in space, NASA’s retried Earth Radiation Budget Satellite (ERBS) is about to fall from the sky. On Friday, the agency said the likelihood of wreckage from ERBS harming anyone on Earth is “very low.” NASA expects most of the 5,400-pound satellite will burn up upon re-entry. Earlier this week, the Defense Department predicted ERBS would re-enter the Earth’s atmosphere on Sunday at approximately 6:40PM ET, give or take 17 hours.
While it may not be a household name, the Earth Radiation Budget Satellite had anything but a dull history. Per Phys.org, the Space Shuttle Challenger carried the satellite to space in 1984, a little more than a year before Challenger’s heartbreaking demise in early 1986. Astronaut Sally Ride, the first American woman to fly to space, released ERBS from Challenger’s cargo hold using the spacecraft’s robotic arm. During that same mission, Ride’s crewmate, Kathryn Sullivan, became the first American woman to perform a space walk. It was also the first mission to see two female astronauts fly to space together. As for ERBS, it went on to collect ozone and atmospheric measurements until 2005. Scientists used that data to study how Earth absorbs and radiates solar energy. ERBS’s contribution to science is even more impressive when you consider NASA initially expected it would only stay functional for two years.
Hisense’s UX Mini LED TV can produce 2,500 nits of peak brightness
Once you get past the gimmicks, there’s a common thread among the TVs announced at CES 2023. Every manufacturer is trying to produce the brightest possible sets. For Samsung and LG, that has meant doubling down on their respective OLED display technolo…
Panasonic’s portable Nanoe X air purifier filters odors and pollutants while you drive
Put away the Little Trees air freshener, Panasonic has a more advanced solution the next time you want to make your car smell its best. At this year’s CES, the company showed off a portable air purifier that can fit in the cupholder of nearly any car, …
Holoride’s Retrofit kit puts in-car VR technology in any backseat
Four years after debuting at CES 2019, Holoride’s in-car VR technology is finally poised to go mainstream. Starting today, the startup has begun selling Retrofit, an all-in-one system you can install in your car to access Holoride content, in the US an…
Samsung’s $200 Galaxy A14 5G features a better selfie camera
For an event that was once the venue where Samsung announced its latest Galaxy S phones, CES isn’t much of a mobile show these days. But you do still see the occasional phone unveiling, including the newly announced Samsung Galaxy A14 5G. It’s a more a…
Samsung bets on MicroLED and 8K for its premium 2023 TVs
Four years after introducing The Wall at CES 2018, Samsung is poised to take its MicroLED technology mainstream. At CES 2023, the company announced it would offer 50-, 63-, 76-, 89-, 101-, 114- and 140-inch MicroLED models, greatly expanding the amoun…
Nanoleaf’s Sense+ Control lighting line can automate itself
Most smart home products promise to save you time by allowing you to create schedules to automate tasks like turning on your lights, but taking advantage of that functionality requires first creating those schedules. Nanoleaf’s newest product line promises to do that work for you. Announced at CES 2023, the Sense+ Control family consists of three products: the Sense+ Smart Light Switch, Sense+ Wireless Light Switch and Nala Learning Bridge. All three are Matter and Thread enabled. They also feature built-in motion and ambient light sensors. The Nala Learning Bridge (pictured above) acts as a Thread Border Router so that you can use it as the hub of your smart home network. You can also use the Nala Learning Bridge as a night light to add a bit of ambiance to a room.
Nala is also the name of Nanoleaf’s new Automations Learning Assistant and what makes the Sense+ Control line interesting. The company claims Nala can learn your routines and eventually know when to turn your lights on or off and adjust their brightness and color to your liking. “Over time, users will be able to have a truly intelligent and hands-free experience with the smart lighting in their home,” says Nanoleaf. The Sense+ Control line will arrive in the second half of the year. Nanoleaf also plans to update its existing Thread Border Routers to support Nala.
Alongside the Sense+ Control line, the company announced several other new products. First, there’s the Nanoleaf 4D, a system for synchronizing your Nanoleaf lights with your TV. Set to arrive before the second half of the year, the 4D Starter Kit will ship with Nanoleaf’s new Screen Mirror Camera and a Matter-compatible Lightstrip that features 50 addressable LED zones and four mirroring modes. With the help of the company’s Sync+ technology, you can synchronize the Lightstrip and all your Nanoleaf lights with the action on your TV. If you want more consistent lighting, the Sync+ platform also supports the usual assortment of pre-made scenes, including Nanoleaf favorites like “Aurora Borealis” and “Vibrant Sunrise.”
When installing the Nanoleaf 4D, you can mount the camera on top of your TV or just below it. You’ll find adhesive and snap-on brackets inside the box for attaching the Lightstrip. At launch, Nanoleaf will offer the 4D TV Starter Kit in two sizes: one for 55- to 65-inch TVs and another for 70- to 80-inch sets. No word yet on pricing.
Nanoleaf is also adding a ceiling light to its line of modular wall panels. The aptly named Skylight consists of a set of square RGBW LED panels you can freely arrange to create different patterns on your ceiling. Skylight comes with all the features you expect from a Nanoleaf product, including the company’s screen mirroring technology, music visualizer and support for group scenes. You can use the Nanoleaf app to adjust the brightness, color and color temperature of Skylight’s built-in LEDs. Like the Nala Learning Bridge, Skylight also doubles as a Thread Border router. Nanoleaf says it will launch its latest modular lighting system in the second half of the year. Expect pricing details to arrive around then too.
Last but not least, Nanoleaf is updating its Essentials line to add BR30 and GU10 models. The company is also refreshing existing Essentials models, including its original A19 lightbulb, to make them Matter compatible. Owners of existing Nanoleaf products won’t be left out either. The company says it will roll out a software update for its Shapes, Elements, Canvas and Lines lighting products later this year to make them Matter-compatible.
Y-Brush’s ’10-second toothbrush’ arrives in the US
As someone who bought an electric toothbrush far too late in life, I appreciate any product that promises to save me from expensive dental care. After debuting a few years ago in Europe, the Y-Brush, a sonic toothbrush that can clean your teeth in 10 s…
Disgraced FTX founder Sam Bankman-Fried pleads not guilty to federal fraud charges
Sam Bankman-Fried, the disgraced founder and former CEO of crypto exchange FTX, has pleaded not guilty to federal wire fraud charges and other crimes. Per The New York Times, Bankman-Fried appeared before a Manhattan court on Tuesday, nearly two weeks …